======= History Log ============
========================= 2023/11/03, LP Series 1_31_0 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00681 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 11/03/2023 - add: (SD-4501) Allow 2.0 migration packages from webpage
2. 11/03/2023 - fix: (SD-3680) Report correct MAC address on controller power-up
3. 11/03/2023 - fix: (SD-4081) Strike relay not activating correctly.
4. 11/03/2023 - fix: (SD-4340/SD-3719) Fix for door strikes firing at the same time
5. 11/03/2023 - fix: (SD-4404/SD-4038) Incorrect relay is firing in Master/Slave reader setup
6. 11/03/2023 - fix: (SD-4129) LED & Relay not following strike time
7. 11/03/2023 - fix: (SD-4080) Issue causing reader LED to be out of sync
8. 11/03/2023 - fix: (SD-4318) Fix for reporting Held open transaction instead of forced open
9. 11/03/2023 - fix: (SD-4097) Relay not pulsing in ACR tailgate mode
10. 11/03/2023 - fix: (SD-4083) Strike incorrectly deactivating in certain ACR modes
11. 11/03/2023 - fix: (SD-4169) Fix for Forced Open transaction in Master/Slave reader setup
12. 11/03/2023 - fix: Various security enchancements
<<<<<<< CUMULATIVE BUILD COUNT 00680 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 08/03/2023 - fix: (SD-4005) Fixed an issue of ACR in mode 7 flashing LED when loses connection to V100 on LP4502
2. 08/10/2023 - fix: (SD-3928) Fixed an issue of ACR mode not being preserved for reader on port 2 when V100 on LP4502 is disabled and enabled
3. 08/10/2023 - fix: (SD-3995) Modified to not support PIN first on ACR mode 7 for LP4502 with V100
4. 08/10/2023 - fix: (SD-3719) Fixed an issue of not being able to activate relays simultaneously on LP4502 with V100
========================= 2023/07/13, LP Series 1_30_9 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00679 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 06/23/2023 - fix: (SD-3751) Fixed an issue of LP4502 with V100 master/slave configuration generating additional alarm message from ACR slave
2. 07/12/2023 - fix: (SD-3508) Fixed an issue of LED displaying yellow on access grants on LP4502 with V100 with iCLASS SE readers.
3. 07/12/2023 - fix: (SD-3558) Fixed an issue reading Mifare card on iCLASS SE and SE RK40 readers on LP4502 with V100.
4. 07/13/2023 - fix: (SD-2458) Fixed an issue of not generating transaction messages on invalid PIN when ACR is set to Card & PIN mode.
========================= 2023/05/25, LP Series 1_30_8 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00678 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 05/25/2023 - fix: (SD-3702) Resolved an issue of DHCP Lease Renewal on network change
========================= 2023/05/05, LP Series 1_30_7 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00677 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 05/05/2023 - fix: (SD-3675) DHCP task overrides dip switch based network settings
2. 05/05/2023 - fix: (SD-2604) increased webpage security
<<<<<<< CUMULATIVE BUILD COUNT 00676 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 05/01/2023 - fix: (SD-3500) Resolved an issue of not being able to disable door alarm on V100
2. 05/01/2023 - fix: (SD-3519) Resolved an issue where Command 308 fails for reader 2 on V100
3. 05/01/2023 - fix: (SD-3563) Resolved an issue with LED lights on Master/Slave ACRs are not being as expected
========================= 2023/04/12, LP Series 1_30_6 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00675 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 04/19/2023 - fix: (SD-3608) Resolved an issue with DHCP renewal not including Hostname with Option 12
========================= 2023/01/06, LP Series 1_30_5 =============================
NOTE: Downgrades to older versions from 1.30.5 are not supported for boards with Wiznet PHY.
<<<<<<< CUMULATIVE BUILD COUNT 00674 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 12/22/2022 - fix: (SD-3399) Resolved an issue with how VertX inputs were reporting changes of state information (LP4502 only)
2. 12/22/2022 - fix: (SD-3389) Resolved an issue where LP4502 cannot connect to 15 V100s
3. 12/22/2022 - fix: (SD-3166) Resolved an issue where some V100s connected to LP4502 don't return online after being offline
WEB MODULE:
1. 01/04/2023 - fix: (SD-3477) Resolved an issue where web users were not being properly logged out
2. 01/06/2023 - fix: (SD-3476) Resolved an issue downloading the Syslog
<<<<<<< CUMULATIVE BUILD COUNT 00672 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 12/12/2022 - mod: (SD-3403) Added hooks need for new AAM Type (5) for Validation Agent
2. 12/08/2022 - fix: (SD-3054) Resolved an issue where the VertX V100 monitor point status change report is not aligned to its proper settings (LP4502 only)
3. 12/06/2022 - fix: (SD-3035) Resolved an issue where the GMT Offset was not being set appropriately
4. 12/06/2022 - mod: (SD-3381) Added Hardware Component field added to ID report so additional details can be retrieved.
5. 12/06/2022 - fix: (SD-3369) Resolved an issue where a controller loses its GMT offset and operates with incorrect time after a firmware update
6. 12/06/2022 - fix: (SD-3348) Resolved an issue where an interior point would not set a new alarm state when an IPS exit delay timeout occurs.
7. 11/29/2022 - fix: (SD-3249) Resolved an issue where a procedure action to change operating mode enforcing existing operating mode does not work correctly
8. 10/24/2022 - mod: (CPD-591) Added support for new Wiznet PHY
9. 10/15/2022 - fix: (SD-3267) Resolved DHCP not sending out new DHCP Request/Discovery when link goes from down to up
10. 10/05/2022 - mod: (SD-121) Removed weak DH 1024 key exchange algorithm
11. 09/30/2022 - fix: (SD-2090) Resolved a memory leak in controller when IP Client reconnecting over and over
12. 09/28/2022 - fix: (SD-3261) Resolved an issue where PW7K/PRO42 controllers allow downgrade from 1_30_4 by converting to another type
WEB MODULE:
1. 12/11/2022 - mod: (SD-3398) OEM code update
2. 12/06/2022 - fix: (SD-2867) Resolved an issue with Web Config Timeout Redirect Page
3. 12/06/2022 - fix: (SD-2862) Resolved where a crash was causing a 500 Internal server error on webpages
4. 11/14/2022 - fix: (SD-3377) OEM code update
5. 11/12/2022 - fix: (SD-2799) Resolved a level 3 web user permission issue
6. 11/09/2022 - fix: (SD-3354) Resolved an issue where Webpage common password popup was reporting incorrectly.
7. 09/30/2022 - fix: (SD-2936) Resolved a web user editing issue
========================= 2022/08/18, LP Series 1_30_4 =============================
NOTE: Downgrades to older versions from 1.30.4 are not supported
<<<<<<< CUMULATIVE BUILD COUNT 00671 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2022/08/18 - fix: Initializing crypto chip
<<<<<<< CUMULATIVE BUILD COUNT 00670 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2022/08/11 - mod: Removed debug logging
2. 2022/08/11 - fix: (SD-3251) OSDP keys failing to delete on a bulk erase
3. 2002/08/11 - fix: (SD-3250) FW downgrade (PRO4200)
<<<<<<< CUMULATIVE BUILD COUNT 00669 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2022/07/14 - fix: (SD-2472) Host Grant Bypass: Inconsistent timeout behavior when host is not connected to controller
2. 2022/07/06 - fix: (SD-2782) REST response reporting unauthorized user
3. 2022/07/27 - fix: (SD-3162) Control Point not deactivating and contradicting the transaction report
4. 2022/08/05 - fix: (SD-2647) Control Point activity not generating transactions
5. 2022/08/08 - add: (CPD-581) New crypto chip support
WEB MODULE:
1. 2022/07/25 - fix: (SD-2597) Cross-Site Scripting vulnerability
========================= 2022/06/06, LP Series 1_30_3 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00668 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2022/04/25 - fix: (SD-2971) Loading certificate chain during provisioning
2. 2022/05/06 - fix: (SD-1999) PSIA event stream timestamp
3. 2022/05/09 - fix: (SD-2924) PSIA to handle larger credential IDs
4. 2022/05/09 - fix: (SD-2857) Inability to create web users
5. 2022/05/26 - fix: (SD-2917) Command 343 using UTC time
6. 2022/06/02 - fix: (SD-2794) Improperly restoring non-web users
7. 2022/06/02 - fix: (SD-2895) Aperio AH40 SIOs failing to come back online after a reboot
8. 2022/06/06 - mod: (SD-3047) PSIA: Generate transaction message [6:21] to indicate access was attempted
9. 2022/06/06 - fix: (SD-3019) PSIA status not reporting correctly after a reboot
SIO MODULE:
1. 2022/06/06 - fix: (SD-2363) OSDP File Transfer not waiting delay period at end
WEB MODULE:
1. 2022/05/16 - fix: (SD-2841) Potential injection vulnerability
2. 2022/05/18 - mod: (SD-2915) Updated OEM 15104 defaults
3. 2022/05/26 - fix: (SD-2558) Potential condition where web users can be deleted
4. 2022/05/26 - mod: (SD-3037) Updated logo for OEM code 6144
5. 2022/05/27 - mod: (SD-2980) Updated OEM 16384 defaults
6. 2022/06/02 - fix: (SD-2984) Applying network settings refreshes page and shows default settings
========================= 2022/02/09, LP Series 1_30_2 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00665 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2022/02/09 - mod: (SD-2844) Improved FW download security
2. 2022/02/09 - fix: (SD-2689) Fix crash when reader and output are configured on separate VertX SIOs for elevators (LP4502 only)
3. 2022/02/09 - fix: (SD-2830) Fix potential exhaustion of access request buffers
WEB MODULE:
1. 2022/02/09 - mod: (SD-2837, SD-2842) Improved user access security
2. 2022/02/09 - fix: (SD-2838) Fix potential injection vulnerability
3. 2022/02/09 - fix: (SD-2812) Fix potential deletion of files
<<<<<<< CUMULATIVE BUILD COUNT 00664 >>>>>>>
FileSystem 2.23
WEB MODULE:
1. 2022/01/14 - mod: (SD-2811) Improved user access security
========================= 2021/11/17, LP Series 1_30_1 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00663 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2021/10/05 - fix: (SD-2557) Aperio IP Hub AH40, Escape and Return, presenting card causing escape and return cycle
2. 2021/10/05 - fix: (SD-2554) pivCLASS longevity appears to show a memory leak in the ICD (LP4502 Only)
3. 2021/10/05 - fix: (SD-2614) Card number is truncating to 32-bit in corporate card mode
4. 2021/10/12 - add: (SD-2629) REX transaction at the beginning of REX cycle
5. 2021/10/25 - add: (SD-2664) HID Origo Cert for Reader Helper
6. 2021/11/02 - fix: (SD-2667) APB Mode 1 not producing APB violation transaction
7. 2021/11/02 - add: (SD-2662) Corporate 1000 (35-bit and 48-bit) parity check capability
8. 2021/11/08 - fix: (SD-2663) OTIS DECs disconnecting when a new server heartbeats (LP4502 Only)
9. 2021/11/11 - add: (SD-2230) Single config ID per option to UDM Translator
10. 2021/11/11 - add: (SD-2231) Config groups for every option to UDM Translator
11. 2021/11/11 - add: (SD-2323) Fit to work feature
12. 2021/11/12 - mod: (SD-2684) Cleanup logs from UDM Translator
WEB MODULE:
1. 2021/10/29 - fix: (SD-2661) Getting access denied when adding routes
========================= 2021/06/15, LP Series 1_30_0 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00662 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2021/08/19 - fix: (SD-1933) ADA Extended time dc_held2 not honored on Aperio Locks
2. 2021/09/10 - fix: (SD-2579) Readerless, door sensor, strike ACR drops SCP offline when door sensor input activated
3. 2021/09/10 - fix: (SD-2555) LSP Digest connection fix
WEB MODULE:
1. 2021/09/02 - mod: (SD-2551) Add HID Linq configuration options to webpage
2. 2021/09/10 - fix: (SD-2553) Certificate Downloads fail when loading through the webpage
<<<<<<< CUMULATIVE BUILD COUNT 00661 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2021/07/30 - mod: (SD-2473) HID Linq Security Updates
2. 2021/07/30 - fix: (SD-2200) Aperio IP Hub cannot enter Privacy Mode in ACR Mode 2
3. 2021/08/03 - fix: (SD-2474) REST endpoints authorization
WEB MODULE:
1. 2021/07/20 - mod: (SD-2375) Update OEM 15104 defaults
<<<<<<< CUMULATIVE BUILD COUNT 00660 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/10/15 - fix: (SD-846) Potential crash in the 109 command
2. 2019/10/16 - fix: (SD-854) 128 command sent before the 109 command fails to bring dormakaba SIO online
3. 2019/10/16 - mod: (SD-827) dormakaba send an ACR config message for when a 308 command is sent
4. 2019/10/23 - fix: (SD-641) Crash granting access with the new REX mode enabled
5. 2019/10/24 - fix: (SD-551) Secure partition not allowing new license files to be sent
6. 2019/10/29 - mod: (SD-915) Provide more details for the powerup diagnostics for a software crash
7. 2019/10/31 - fix: (SD-904) ANSSI readers stop reading cards after a system power cycle
8. 2019/11/01 - fix: Set time is NAKing if set time is already in process
9. 2019/11/04 - mod: (SD-933) Exit out of EntryPoint card process when another card operation is in progress
10. 2019/11/05 - fix: (SD-872) SCP information from reverting to default values
11. 2019/11/08 - fix: (SD-893) 903 command allowing invalid values to be set
12. 2019/11/08 - fix: (SD-870) Single or Repeat CP Pulse does not report back CP in a secure state
13. 2019/11/12 - mod: (SD-957) dormakaba Custom Transaction changes
14. 2019/11/13 - fix: (SD-970) No diagnostic message logged when getting a DENY with EntryPoint
15. 2019/11/13 - fix: (SD-972) EntryPoint not logging diagnostic message if invalid number of bits is returned from reader
16. 2019/11/14 - mod: (SD-855) Added FW Download to Degraded Mode
17. 2019/11/15 - fix: (SD-971) EntryPoint was returning 0 bits on error with HARS
18. 2019/11/19 - mod: (SD-967) PW7K / PRO4200 default card db size to 16MB
19. 2019/11/19 - mod: (SD-930) Properly return MSP1 status (for network and internal SIO)
20. 2019/11/21 - fix: (SD-973) Bulk erase to setup and clear EEPROM
21. 2019/11/25 - fix: (SD-974) Access Levels being lost after power loss
22. 2019/11/25 - fix: (SD-885) Fixed garbage reporting of invalid PINs that do not exist in the database
23. 2019/11/25 - fix: (SD-928) 6:41 transaction showing up when readers are not configuring for APB
24. 2019/11/25 - fix: (SD-962) ACR without a linked reader not following 308 command
25. 2019/11/26 - fix: (SD-1021) Procedure actions of type 28 (key sim)
26. 2019/12/04 - mod: (SD-898) Force ACR mode to CARD & PIN when utilizing ANSSI on a reader
27. 2019/12/05 - fix: (SD-1006) V100 relay not firing for the first card read
28. 2019/12/06 - fix: (SD-1030) Sending down 1105 command too early can result in timeout fields and adbFlags getting cleared
29. 2019/12/10 - fix: (SD-1023) fix RS485 port mapping for PW7K and PRO4200
30. 2019/12/10 - mod: (SD-1042) PW7K / PRO4200 in legacy mode communicate over Honeywell MSP1 protocol
31. 2019/12/10 - mod: (SD-1043) PW7K / PRO4200 in legacy mode communicate over Honeywell MSP2 protocol
32. 2019/12/10 - fix: (SD-1035) Overflow for 1900 based time values for the custom_time field in the 302 command
33. 2019/12/17 - fix: (SD-940) Multiple OSDP readers not working on Honeywell onboards SIOs
34 2019/12/17 - fix: (SD-1071) Timezone interval does not become inactive at the end of the minute
35. 2019/12/18 - mod: Dormakba add strkt2 field to acr config message
36. 2019/12/23 - mod: (SD-1110) PW7K / PRO4200 default to OEM code 3328
37. 2019/12/30 - fix: (SD-1120) Web Activity transactions not setting iCurUserId correctly
38. 2019/12/30 - fix: (SD-1121) iObjectUserId is set to 0 for the successful login (20:17) transaction
39. 2019/12/30 - fix: (SD-1125) Web Activity field szObjectUser incorrectly being filled in
40. 2019/12/30 - fix: (SD-1122/SD-1115) Crash when elevators defined and relay count is above 0
41. 2019/12/30 - fix: (SD-1129) Web Activity transactions for add/modify/delete users list both iCurUserId and iObjectUserId as 0
42. 2019/12/30 - fix: (SD-1131) Web Activity transactions for default admin account do not report up proper user ID of 99
43. 2020/01/07 - fix: (SD-1179) Controller in legacy mode dropping offline (Honeywell Boards Only)
44. 2019/01/09 - fix: (SD-1037) Connecting to LSP with non-default username and password
45. 2020/01/16 - fix: Potential Mercury DHCP Issue with Bringing All 32 MR62Es SIOS Online
46. 2020/01/20 - fix: (SD-1243) Concurrent DNS resolution requests (causing multiple MR51e's to NEVER come online)
47. 2020/01/23 - fix: Transaction 65 status fields were filled backwards
48. 2020/01/23 - mod: (SD-1180) Add additional checks when creating a user with 2250 command
49. 2020/01/31 - fix: (SD-1275) Controller reporting false events after swiping cards in a certain way
50. 2020/01/31 - fix: (SD-1301) REX firing if active after a reboot
51. 2020/02/11 - fix: (SD-1101) Not sending all COP/DOP specific mask data to KGC on Init
52. 2020/02/13 - fix: (SD-1346) Bulk erase logic to remove network settings
53. 2020/02/21 - fix: (SD-1311) Occasionally cardholder activity messages are not sent even when there are changes queued up
54. 2020/03/03 - fix: Sending KONE DOP specific masks on init when there is no mask for the Disconnect state
55. 2020/03/11 - mod: Addressed multiple issues raised by our Static Code Analysis tool
56. 2020/03/19 - mod: (SD-1490) Ability to lock down floors immediately by increasing how often we check for time zone changes for elevators
57. 2020/03/20 - fix: (SD-1459) Controller in IP Client mode is not reconnecting after a DOS attack
58. 2020/03/26 - fix: (SD-991) dormakaba Card Holder Database Race condition
59. 2020/03/26 - mod: (SD-1431) Added Failure to Dog fault reporting for RMRU
60. 2020/03/27 - mod: (SD-1430) Added RMRU Fault to the extended input status
61. 2020/04/06 - mod: Added ACR Tamper Source type to list of allowed source types for dormakaba
62. 2020/04/07 - fix: (SD-1321) Override Mode on Aperio lock when lock is in privacy mode
63. 2020/04/07 - fix: (SD-1034) OTIS Failover Server
64. 2020/04/10 - mod: (SD-1517) Added OTIS shutting down DECs' not installed on our system by setting DEC that comes online but not configured to Oper Mode 3 with access to no floors
65. 2020/04/13 - fix: (SD-1432) Added RMRU Manual Dogging State Transaction
66. 2020/04/20 - fix: (SD-1309) V100 Keypad readers not generating invalid/valid transactions (LP4502 Only)
67. 2020/04/23 - fix: (SD-1511) PIN to PACS LCD issue
68. 2020/04/24 - fix: (SD-1485) V100 dropping connection to LP4502
69. 2020/04/30 - mod: (SD-1433) Added in fault reporting for RMRU Dogging Slipped Fault
70. 2020/05/06 - mod: (SD-1533) Improve diagnostic logging capabilities
71. 2020/06/08 - fix: (SD-1482) LSP input changes not being reported
72. 2020/06/19 - fix: (SD-1501) Time drift set up on same NTP server
73. 2020/06/29 - fix: (SD-1769) Timezones using wrong time in Backwards Compatibility (Legacy) Mode
74. 2020/07/06 - fix: (SD-1755) Output 1 and 2 are mapped to the wrong relay (Honeywell Boards Only)
75. 2020/07/13 - fix: (SD-1794) Controllers fail to sync to the NTP Server configured when in Backwards Compatibility (Legacy) mode
76. 2020/07/15 - mod: (SD-1812) Create Area Counting Fix Prototype
77. 2020/10/23 - fix: (SD-1256) 215 Command loading certificate without a new line character
78. 2020/12/04 - fix: (SD-1754) Validate username length for 2250 command
79. 2020/12/14 - mod: (SD-2140) Add New Procedure Action to Support Transaction Filtering
80. 2020/12/14 - mod: (SD-1861) Generate transactions when adding and deleting users with 2250 command
81. 2020/12/18 - mod: (SD-2129) Added NAK description codes for card record add failures
82. 2020/12/18 - mod: (SD-2126) Added two NAK description codes for the 112 command for invalid SIO number or invalid RDR number
83. 2020/12/29 - mod: (SD-2169) NAK description codes added for command for setting the use limit on a card
84. 2021/01/15 - mod: (SD-2159) Fortify ethernet driver
85. 2021/01/20 - fix: (SD-1758) 2250 command can create a standard web user with a invalid characters in the username and notes field
86. 2021/02/03 - fix: (SD-1775) Aperio lock in Escape & Return is reporting door forced open when the door is unlocked
87. 2021/02/05 - fix: (SD-895) SimonsVoss Pin Pad Addressing
88. 2021/02/12 - fix: (SD-2229) 2250 command for standard login missing space between nAcctType and cNotes fields
89. 2021/02/19 - fix: (SD-2249) TypeArea transaction generated related multi occupancy change of state when there were no changes
90. 2021/03/03 - mod: (SD-2183) Support for new NDE/LE version "B" locks
91. 2021/03/09 - fix: (SD-2245) Origo Certificate Uploading on webpages
92. 2021/03/30 - fix: (SD-2315) SimonsVoss polling mode
93. 2021/04/01 - fix: (SD-894) SimonsVoss Remove Unnecessary GetStatus Message
94. 2021/04/01 - fix: (SD-2318) SimonsVoss save/restore to/from flash
95. 2021/04/01 - mod: (SD-2319) SimonsVoss support for new Smart Handle AX lock
96. 2021/04/30 - mod: (SD-2298) Create flag to Enable/Disable Peer Certificate support
97. 2021/04/30 - mod: (SD-2047) Connect to Aperio IP HUB over TLS
98. 2021/05/04 - mod: (SD-1762) Preserve rex tz_mask on reboot
99. 2021/05/04 - mod: (SD-2169) 3323 set use limit missing NAK description codes
100.2021/05/07 - mod: (SD-2300) Add Count Filtered Transactions using trigger activation count
101.2020/05/12 - mod: (SD-2127) Added NAK description codes for ACR configuration
102.2020/05/12 - mod: (SD-2128) Added in NAK description codes for the 1105 command
103.2021/05/28 - mod: (SD-901) Add Lock integrations the ability to overwrite the controller's (receive) timestamp
104.2021/06/07 - fix: (SD-2058) Initialize correct V100/V200/V300 values (LP4502 ONLY)
105.2021/06/08 - mod: (SD-1683) Enhance Host Grant Functionality
106.2021/06/22 - mod: (SD-2240) HID Linq Discovery of panels logic
107.2021/07/13 - mod: (SD-2230 & SD-2231) HID Linq Implement a Single Config ID per Option and Group
SIO MODULE:
1. 2019/11/25 - fix: (SD-997) Suprema Reader not working with latest 1.4 firmware
2. 2020/01/03 - mod: (SD-878) EntryPoint PIV messages handling improvements
3. 2020/09/28 - mod: (SD-1354) CPU processing optimizations
4. 2021/01/07 - mod: (SD-1827) Biometric Scan bypassed on MR52-S3
WEB MODULE:
1. 2019/10/22 - mod: (SD-811) Potential vulnerability when downloading files from webpages
2. 2019/10/17 - mod: (SD-198) Add IP address of connected client in Device Info webpage
3. 2019/12/12 - fix: (SD-1050) OSDP File Transfer page showing undefined for ACRs'
4. 2020/01/08 - mod: (SD-1180) Add additional checks when creating a user
5. 2020/01/14 - fix: Time Server page not showing time server save transactions
6. 2020/03/31 - fix: (SD-1513) Fix the web-config Welcome page Home Notes, disallow semicolons which cause odd half-logged-out behavior
7. 2020/06/03 - fix: (FW126-828) Extra text is listed after OSDP file on web page when loading a long filename
8. 2020/06/24 - fix: (SD-1210) NTP Time Server page not displaying transactions
9. 2020/07/02 - mod: (SD-1712) Updates to HID Origo Webpage
10.2020/12/14 - mod: Changed showing 0.0.0.0 as the onlink gateways to the more correct "On-Link (*)" designator for the Advanced Network page
11.2021/06/16 - mod: (SD-2407) Remove HID Reader Manager Desktop webpage
<<<<<<< CUMULATIVE BUILD COUNT 00656 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/05/07 - mod: (SD-1712) Added HID Origo Webpage
2. 2021/03/08 - mod: Aperio IP Hub updates to resolve small issues (introduced in last commit) around REX functionality
3. 2021/03/02 - mod: Aperio IP Hub updates for lock stability
4. 2021/01/26 - mod: Aperio IP Hub tamper support
5. 2021/01/13 - mod: Aperio IP Hub updates
<<<<<<< CUMULATIVE BUILD COUNT 00655 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2021/01/27 - mod: Origo support (Alpha)
<<<<<<< CUMULATIVE BUILD COUNT 00653 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2021/01/12 - mod: (SD-2146) Transaction suppression support (Alpha)
<<<<<<< CUMULATIVE BUILD COUNT 00650 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/11/10 - mod: Aperio IP hub support (Alpha)
========================= 2021/03/26, LP Series 1_29_7 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00658 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2021/01/05 - fix: (SD-1830) Fixed time logic in monitor thread
2. 2021/01/05 - mod: (SD-2174) Update time logic used within watchdog message logging
3. 2021/03/24 - fix: (CPD-338, CPD-237) Fixed SDRAM configuration for 2nd memory bank on the LP4502
========================= 2021/02/04, LP Series 1_29_6 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00654 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/12/18 - fix: (SD-2080) Fixed scenario where controller can get in a state where it no longer reports transactions
2. 2020/12/29 - fix: (SD-1833) Fixed incomplete Card & Pin message when pressing just the "#" key
3. 2021/01/22 - mod: (SD-2173) Update internal logic used to determine if device is in 'degraded mode'
4. 2021/01/25 - mod: (SD-2158) Update to internal logic to improve overall system performance
5. 2021/01/26 - fix: (SD-2062) Fixed max occupancy behaving unpredictably when global APB free pass is granted and the area is "cleared"
6. 2021/01/28 - fix: (SD-2088) Fixed air lock access granted transaction followed by "Rejected: airlock busy"
WEB MODULE:
1. 2021/01/15 - mod: (SD-2095) Updates to OEM settings for OEM code 1024
2. 2021/01/18 - mod: (SD-2094) Updates to OEM settings for OEM code 15104
<<<<<<< CUMULATIVE BUILD COUNT 00653 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00652 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00651 >>>>>>>
FileSystem 2.23
========================= 2020/11/04, LP Series 1_29_5 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00650 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/10/15 - fix: (SD-1760) Fixed issue with control point timing accuracy
2. 2020/10/15 - fix: (SD-2003) Fixed issue with control point accuracy when time is over 26 seconds
3. 2020/10/19 - mod: (SD-1927) Update LP1501 RS485 driver
4. 2020/10/06 - mod: (SD-1928) Update LP1502 RS485 driver
5. 2020/11/02 - fix: (SD-1750) Fixed issue with VertX SIO's not reconnecting when disabled/re-enabled with 109 command
6. 2020/11/03 - mod: (SD-1929) Update LP2500 RS485 driver
WEB MODULE:
1. 2020/10/26 - mod: (SD-1564) Updates to OEM settings for OEM code 1024
2. 2020/10/26 - mod: (SD-1564) Updates to OEM settings for OEM code 7936
<<<<<<< CUMULATIVE BUILD COUNT 00649 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00648 >>>>>>>
FileSystem 2.23
========================= 2020/08/05, LP Series 1_29_4 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00647 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/07/15 - mod: (SD-1333) Fixed issue where additional card read is not ignored when previous request is pending opening of door with multi occupancy
2. 2020/07/31 - fix: (SD-1844) Update crypto memory initialization logic used during production
3. 2020/08/04 - mod: (SD-1843) Update maximum FW upload size
<<<<<<< CUMULATIVE BUILD COUNT 00646 >>>>>>>
FileSystem 2.23
========================= 2020/07/13, LP Series 1_29_3 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00645 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/06/30 - fix: (SD-1789) Fixed SIO stability issue introduced with LP4502 serial driver updates (LP4502)
<<<<<<< CUMULATIVE BUILD COUNT 00644 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/03/30 - fix: (SD-1523) Fixed missing card holders with dormakaba after initial config is sent
2. 2020/04/20 - fix: (SD-1576) Fixed duplicate transactions when configured to use dormakaba
3. 2020/03/26 - fix: (SD-1319) Fixed pivCLASS card processing if time is set backwards
4. 2020/04/23 - fix: (SD-1232) Fixed user experience with LCD when using pivCLASS Pin-to-PACS
5. 2020/04/29 - fix: (SD-1605) Fixed possible race condition with pivCLASS in-between card reads
6. 2020/05/28 - mod: (SD-1024) Update LP4502 RS485 driver
7. 2020/05/12 - fix: (SD-1606) Fixed RMRU failure to dog fault timeout
8. 2020/03/16 - fix: (SD-1487) Fixed time calculation used for VertX REX
9. 2020/04/17 - mod: (SD-1484) Update VertX A/D values used for input(s)
10.2020/05/07 - fix: (SD-1022, SD-1659) Fixed VertX door forced alarm
11.2020/05/05 - fix: (SD-1296) Fixed VertX door held timer
12.2020/06/03 - fix: (SD-1742) Fixed auxillary authentication logic that would generate "2005 Response" error
13.2020/06/03 - fix: (SD-1748) Fixed logic to avoid potential crash with EntryPoint for a reader without linked ACR
14.2020/06/17 - fix: (SD-1767) Fixed potential hanging file descriptor related to DIP switches
15.2020/06/08 - mod: (SD-1613) Update logic in pivCLASS Pin-to-PACS to avoid superfluous card read
16.2020/06/18 - mod: (SD-1579) Update device drivers (MMC, DMA) to improve system stability
<<<<<<< CUMULATIVE BUILD COUNT 00643 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/06/04 - fix: Fixed reporting of input state changes from LifeSafetyPower
<<<<<<< CUMULATIVE BUILD COUNT 00642 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/04/06 - fix: Fixed Override Mode On Aperio Door When Door is in privacy mode
<<<<<<< CUMULATIVE BUILD COUNT 00641 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/04/29 - fix: Fixed possible race condition after pivCLASS card read and start of a new read
2. 2020/04/30 - fix: Update to RMRU "dogging slip" fault logic
<<<<<<< CUMULATIVE BUILD COUNT 00640 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00639 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/03/25 - mod: Add support for RMRU latchbolt fault reporting
2. 2020/03/25 - mod: Add support for RMRU "failure to dog" reporting
3. 2020/04/13 - mod: Update RMRU manual "dogging" state transaction
4. 2020/04/21 - mod: Add support for RMRU "dogging slip" fault reporting
<<<<<<< CUMULATIVE BUILD COUNT 00638 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/04/07 - mod: Update OTIS logic to handle failover servers
2. 2020/04/10 - mod: Update logic to 'shutdown' OTIS DEC's that are not configured
========================= 2020/04/01, LP Series 1_29_2 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00637 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/03/31 - fix: Fixed issue with USB ethernet adapter not being recongnized after its unplugged/replugged
<<<<<<< CUMULATIVE BUILD COUNT 00636 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/03/03 - fix: Fixed cases where all KONE SMasks were not being sent to the correct DOP
2. 2020/03/04 - fix: Fixed cases where not all cardholders were sent to dormakaba Wi-Q hardware
3. 2020/03/19 - mod: Increased rate at which the controller checks for time zone changes when OTIS elevators are configured
4. 2020/03/25 - fix: Fixed dormakaba SQL database error(s)
5. 2020/03/25 - fix: Fixed ACR reporting of dormakaba ACR's requested with 407 command
<<<<<<< CUMULATIVE BUILD COUNT 00635 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/03/10 - fix: Fixed issue with DNS resolution after Denial-of-service attack
<<<<<<< CUMULATIVE BUILD COUNT 00634 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/01/27 - mod: Update I2C driver for enhanced bus recovery handling
2. 2020/02/11 - fix: Fixed issue where KONE mask data was not being sent on initialization
========================= 2020/01/31, LP Series 1_29_1 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00633 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/01/20 - fix: Fixed issue where initial ip client connections could take minutes
2. 2020/01/30 - fix: Fixed issue with V100 keypad data reporting
3. 2020/01/31 - fix: Fixed issue where APB causes 'non-stop' transactions after card swipe
4. 2020/01/31 - fix: Fixed issue with REX activation after controller power is restored
========================= 2019/10/14, LP Series 1_29_0 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00632 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/01/17 - fix: Fix issue with connecting to multiple network based devices
<<<<<<< CUMULATIVE BUILD COUNT 00631 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00630 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2020/01/08 - fix: Fixed issue Aperio configuration would crash
2. 2020/01/09 - fix: Reverted previous LSP change (Fixed issue with LSP M8 inputs being disabled) to restore output control functionality
<<<<<<< CUMULATIVE BUILD COUNT 00629 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00628 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/12/18 - fix: Fixed issue where strike mode settings were sent correctly to Vanderbilt SIO's
2. 2019/12/30 - fix: Corrections to web activity transactions
3. 2019/01/02 - fix: Fixed issue with VRINX connectivity if 109 command is resent
<<<<<<< CUMULATIVE BUILD COUNT 00627 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/11/22 - fix: Fixed issue where Access Levels could be lost after a power loss
2. 2019/11/25 - fix: Fixed issue with ACR without reader not following 308 command
3. 2019/12/05 - fix: Fixed incorrect V100 strike time after 1st card read
4. 2019/12/10 - fix: Fixed issue with invalid timestamps after leap year in 2020
5. 2019/12/13 - fix: Fixed issue with Timezone activation/deactivation at beginning/end of minute
6. 2019/12/17 - fix: Fixed issue with VRINX door strike activating later than expected (delayed)
SIO MODULE:
1. 2019/11/25 - fix: Fixed issue Suprema BIO reader support when running FW version 1.4
WEB MODULE:
1. 2019/12/12 - fix: Fixed issue with reporting "Undefined" acr(s) on OSDP file transfer page
<<<<<<< CUMULATIVE BUILD COUNT 00626 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00625 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/10/16 - fix: Fixed issue with bringing dormakaba device online if 128 command is sent prior to 109 command
2. 2019/10/24 - mod: Enforce Card & PIN when reader is configured to use ANSSI
3. 2019/10/27 - mod: Add new status bit to Powerup diagnostic message to indicate software crash
4. 2019/10/30 - fix: Fixed issue with reporting Control Point secure status after a Single or Repeat pulse
5. 2019/10/31 - fix: Fixed issue with readers failing to re-enter ANSSI mode after system power cycle
6. 2019/10/04 - fix: Fixed issue with EntryPoint cancellation when another card read is in process
7. 2019/11/05 - fix: Fixed issue with intermittent SN and OEM code reporting a value of 1
8. 2019/11/08 - fix: Fixed issue with host comminication settings mismatch depending on OEM capabilities
9. 2019/11/13 - fix: Fixed error reporting related to EntryPoint
10. 2019/11/13 - mod: Update to EntryPoint logging to report error when reader returns invalid number of bits
11. 2019/11/13 - fix: Fixed issue related to reporting 6:41 transaction when readers are not configured for APB
12. 2019/11/14 - mod: Update to allow controller in degraded mode to download firmware packages
13. 2019/11/19 - fix: Fixed issue with bulk erase not removing all configuration and transactions
14. 2019/11/19 - fix: Fixed issue with MSP1 status reporting
15. 2019/11/21 - fix: Fixed issue with reporting transaction 54:69 when ACR is unlocked and a PIN is entered
SIO MODULE:
1. 2019/10/18 - mod: Increased priority of PIV messages sent to reader
WEB MODULE:
1. 2019/10/22 - mod: Address vulnerability that allows user to access files by URL without logging in
2. 2017/01/28 - mod: Changes for OEM code 1024
<<<<<<< CUMULATIVE BUILD COUNT 00622 >>>>>>>
FileSystem 2.23
SCP MODULE:
2019/02/14 - mod: Log a transaction for when the web configuration settings RESTful endpoint is used
2019/02/20 - fix: OSDP reader LED doesn’t display correct LED status when F2F reader is predefined on controller’s internal reader port.
2019/02/21 - fix: Fixed issues with connection to new LSP hardware
2019/02/28 - mod: Enable AES256 encryption of Series 3 SIO's in loader
2019/03/06 - mod: Added nCardFormat field for COS Elevator Access transaction.
2019/03/13 - mod: Added additional diagnostic logging for AAM failures
2019/03/29 - mod: Update dormakaba functionality to support triggers/procedures
2019/04/03 - fix: Fixed AAM transactions of type 5 where card ID was -1 not properly returning -1
2019/04/16 - mod: Update dormakaba functionality related to Input/Output mapping (related to Mointor/Control points)
2019/04/16 - mod: Update 215 command to return more than 16 characters for file transfer
2019/05/02 - mod: Add new timezone mode (5) that honors both DOW and HT
2019/05/03 - mod: Add new diagnostic command to set time to a particular time
2019/05/06 - fix: Fix issue related to SIO online/offline behavior when downloading SIO FW at 9600 baud
2019/05/17 - mod: Add ability to disable OSDP auto discovery
2019/05/28 - fix: Fixed 314 command activating at top of the minute when it should activate immediately
2019/05/30 - mod: Add logic to monitor internal web server
2019/05/31 - mod: Add option to preserve leading zero's from SimonsVoss readers
2019/06/03 - mod: Update Tunnel support (related to SNMP and NTP passthrough)
2019/06/07 - mod: Add the ability to specify 57600 and 230400 baud rates for OSDP readers
2019/06/11 - mod: Add Card format flag to validate card is in database before matching format in card format lookup
2019/06/12 - mod: Create additional method of changing OEM code with RESTful endpoint
2019/06/15 - fix: Fix issue with proxy settings defaulting to enabled after bulk erase (some OEM's)
2019/06/19 - mod: Create new REX mode that can override the door strike timer if REX is kept high beyond strike time
2019/09/25 - fix: Fix issue related to Override feature not working if Double Card is enabled
2019/07/08 - fix: Fix Card & Pin mode for SimonsVoss locks
2019/07/12 - fix: Fixed issue related to reporting an Escort pending transaction for card that doesn't have access at the current time
2019/07/12 - fix: Fixed issue with resending 1107 command starting a new auto save
2019/07/24 - mod: Update VertX logic to handle boards that may appear 'stuck'
2019/07/26 - fix: Fixed Apartment mode prematurely firing in Card & Pin mode
2019/07/31 - mod: Remove "Long encrypted message" diagnostic messages
2019/07/31 - fix: Fix issue with WaveLynx readers appearing to be locked up with EntryPoint
2019/08/02 - fix: Fixed flash size reporting for LP boards running in legacy mode
2019/08/05 - fix: Fixed Otis mode 1 and mode 3 report 2 access granted messages
2019/08/12 - mod: Update to allow DFO filter time to be configurable per ACR
2019/08/14 - fix: Fixed issue with reporting Escort transactions when Escort is NOT enabled
2019/08/16 - fix: Fixed issue where 308 command would reboot controller if used on an undefined ACR
2019/08/20 - fix: Fixed issue related to Schlage extended mode flags being inadvertently cleared
2019/08/26 - fix: Fixed issue related to OSDP extended color support not working if on command did not include extended color
2019/08/27 - fix: Fixes related to SIO encryption after an SIO FW update
2019/09/10 - fix: Fixed issue related to two persons ability to leave area with 2 person control and leaving 1 person behind
2019/09/10 - fix: Fixed Schlage Pin only mode while in Apartment mode
2019/09/19 - fix: Fixed SIO online/offline communication issue if set clock command is sent repeatedly
2019/09/20 - fix: Fixed reporting of 5:2 transaction when card is presented at a Vanderbilt SIO
2019/09/23 - mod: Update to FW upgrade logic to enhance stability
2019/09/23 - fix: Fixed APB issue when a cardholder swipes at second door with 2 person control with 15 seconds of swipe at 1st door w/ 2 person control
2019/09/24 - fix: Fixed ability to specify more than 4 locks on some downstream SIO devices
2019/09/27 - mod: Update to allow link mode of multiple OSDP readers simultaneously
2019/10/01 - fix: Fixed LED and card access not behaving correctly when sending 308/334 commands to Vanderbilt RI devices
2019/10/04 - fix: Fixed issue with ip client reconnection(s) if host retry timer is set to 20 seconds
2019/10/08 - fix: Fixed BlueDiamond F2F reader Pin mode LED indication when in Card & Pin mode
2019/10/14 - fix: Fixed issue with Schlage EntryPoint integration, no longer able to read cards
SIO MODULE:
2019/03/22 - fix: fix BlueDimond reader: F/2F Pin LED indication is not working in CARD & PIN mode
2019/07/10 - mod: Switch to new baud rate immediately when OSDP auto discovery is disabled
2019/08/20 - fix: Fixed several supervised input ranges
2019/09/16 - fix: Fixed responsiveness of input reading (to be more in line with EP series)
WEB MODULE:
2019/03/11 - mod: Update heading related to loading peer certificate
2019/03/11 - mod: added OEM code for 14080
2019/03/25 - mod: Updates to OEM settings for OEM code 11264
2019/04/01 - mod: Updates to OEM settings for OEM code 6144
2019/05/14 - fix: Fixed issue with Diagnostic webpage crashing when card DB is 96MB
2019/05/17 - mod: Updates to OEM settings for OEM code 2560
2019/05/17 - fix: Fix issue related to editing first user in Users List
2019/06/12 - mod: Add restful endpoint with ability to change OEM code
2019/07/09 - mod: Update error messages on 'edit user' page to better describe error
2019/08/14 - mod: Update Device Info page to show ip address of connected host
2019/09/16 - mod: Add system uptime to the Device Info page
2019/10/03 - mod: added OEM code for 15104
2019/10/03 - mod: added OEM code for 14592
========================= 2019/06/28, LP Series 1_28_0 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00615 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/04/22 - mod: Added support for Mitsubishi elevator integration
2. 2019/05/20 - mod: Update to bulk erase to remove 3rd party packages
3. 2019/05/31 - mod: Various dormakaba support updates
4. 2019/06/04 - mod: Support for converting 200 bit card to 128 bit
5. 2019/06/20 - mod: VertX downstream SIO support added
SIO MODULE:
1. 2019/03/18 - mod: Update to internal reader port handling
2. 2019/04/04 - mod: Update to OSDP COMSET reply handling to avoid potential endless COMSET loop
WEB MODULE:
1. 2019/03/26 - fix: Fixed display of OSDP file transfer transactions (incorrect trans code mappings)
2. 2019/04/04 - fix: Fixed web activity transactions updated to report user
3. 2019/04/08 - fix: Fixed display of elevator transactions (incorrect trans code mappings)
4. 2019/05/02 - mod: Update to diagnostic page to enforce single file actions allowed (download/delete single file at a time)
========================= 2019/09/10, LP Series 1_27_7 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00621 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/09/10 - fix: Fixed issue DNS resolution failures causing SIO's to toggle online/offline
<<<<<<< CUMULATIVE BUILD COUNT 00620 >>>>>>>
FileSystem 2.23
========================= 2019/08/26, LP Series 1_27_6 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00619 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/07/03 - fix: Fixed issue with Aperio locks and privacy mode support
2. 2019/08/02 - fix: Fixed issue with Aperio locks and door manipulation(s) while entering/exiting privacy mode
3. 2019/08/19 - fix: Fixed issue with TLS Required + Cert Verification + Secure Partition
4. 2019/08/22 - fix: Fixed issue with default Mercury MAC address ARP broadcast
<<<<<<< CUMULATIVE BUILD COUNT 00618 >>>>>>>
FileSystem 2.23
========================= 2019/06/19, LP Series 1_27_5 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00617 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/06/27 - fix: Fix the case where failure can prematurely lock crypto memory during production
<<<<<<< CUMULATIVE BUILD COUNT 00616 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00615 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00614 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/06/19 - fix: Fixed issue with saving cards (introduced in 1.27.5.613)
2. 2019/06/19 - fix: Fixed issue with card download performance (introduced in 1.27.5.613)
3. 2019/06/19 - mod: Added Veridt as alternative reader for pivCLASS embedded authentication
WEB MODULE:
1. 2019/06/18 - fix: Fixed reporting of gratuitous ARP settings in RESTful configuration request
<<<<<<< CUMULATIVE BUILD COUNT 00613 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/06/05 - mod: Updates to Watchdog driver to correct spontaneous reboots
2. 2019/06/12 - mod: Update to make gratuitous ARP configurable (off by default)
3. 2019/06/12 - fix: Ensure KONE integration does not send invalid DOP ID and Floor ID if configuration is invalid
SIO MODULE:
1. 2019/03/27 - mod: Remove F2F pre-beeper support
2. 2019/05/29 - mod: Update to previous fix for HID OSDP reader soft reset - added FW version check
<<<<<<< CUMULATIVE BUILD COUNT 00612 >>>>>>>
FileSystem 2.23
<<<<<<< CUMULATIVE BUILD COUNT 00611 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/05/06 - mod: Update internal messaging to support Reader Manager parallel reader update
2. 2019/05/13 - fix: Fixed issue with system efficiency during autosave
<<<<<<< CUMULATIVE BUILD COUNT 00610 >>>>>>>
FileSystem 2.23
========================= 2019/04/23, LP Series 1_27_4 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00609 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/02/04 - mod: Update network port behavior to improve reliability (DoS attack)
2. 2019/02/21 - mod: Update logic used to discover OmniKey smart card reader (LP4502)
3. 2019/03/08 - fix: Fixed issue with intermittent card read failures (swiping card multiple times does not fire the strike)
4. 2019/03/26 - fix: Fixed issue with LSP M8 inputs being disabled
5. 2019/04/01 - mod: Updated error reporting related to ANSSI
6. 2019/04/15 - fix: Fixed issue ANSSI binary card format report incorrect card id
7. 2019/04/15 - mod: Re-enable 8MB and 16MB card database sizes (LP4502)
8. 2019/04/18 - fix: Fixed issue with reading supervised inputs (report different state when compared to EP counterpart)
========================= 2019/03/15, LP Series 1_27_3 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00608 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/03/15 - fix: Fix crypto memory lockup during production
========================= 2019/02/26, LP Series 1_27_2 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00607 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2019/02/01 - fix: Fix issue with reading OEM code and SN at startup (sometimes resulting on OEM and SN of 1)
2. 2019/01/30 - fix: Fix issue with incomplete restoration of saved cards (now check autosave database settings and handle appropriately)
3. 2019/02/08 - fix: Fix issue with mpl_tiny running in "degraded mode"
4. 2019/02/22 - mod: Update LP4502 boot code to recognize additional memory (now up to 256MB)
WEB MODULE
1. 2019/02/12 - mod: Updates to OEM settings for OEM code 10752
========================= 2018/12/21, LP Series 1_27_1 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00606 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/12/20 - fix: Fix issue with recent timezone activation/deactivation change causing tz to trigger at start of minute
<<<<<<< CUMULATIVE BUILD COUNT 00605 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/12/05 - fix: Fix Schlage lock fw reporting
2. 2018/12/05 - mod: Reader Manager updates (future support)
3. 2018/12/07 - fix: Fix issue with AAM support and not enforcing Profile 1 card data
4. 2018/12/08 - fix: Fix issue with Operating Mode Access Level assignments 2116 NAK
5. 2018/12/10 - fix: Fix issue re-requesting Schlage wireless lock info if 115 command is resent
6. 2018/12/10 - fix: Fix message error when attempting to override an Override mode
7. 2018/12/11 - fix: Fix issue(s) with NTP requests failing to connect
8. 2018/12/12 - mod: Update to ANSSI assurance profile mapping
9. 2018/12/14 - mod: Update deadbolt logic (when ACR extended mode is None), to return to default ACR state when deadbolt active
10.2018/12/18 - fix: Update NTP server connection logic
11.2018/12/18 - fix: Fix issue with dormakaba SIO's not receiving initial config messages (unless SIO 0)
12.2018/12/18 - fix: Fix potential crash when sending invalid nCount field in the 1851 command
13.2018/12/19 - fix: Fix issue with SimonsVoss locks exiting office mode and lock becoming unstable
14.2018/12/19 - fix: Fix issue with downstream SIO communication when an OSDP reader is on internal reader port
SIO MODULE
1. 2018/12/04 - fix: Fix LP1501 reader bias logic
2. 2018/12/12 - fix: Fix issue with reader tamper reporting when MR20 attached to MRDT
WEB MODULE
1. 2018/12/05 - fix: Fix OSDP alternate reader file transfer failure notice when transferring to primary reader
2. 2018/12/18 - fix: Fix potential issue where web users can no longer be created
<<<<<<< CUMULATIVE BUILD COUNT 00604 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/11/05 - fix: Fix issue where alternate reader does not come online after initial config is loaded
2. 2018/11/13 - fix: Fix saving of custom certificates when running with Encrypted partition
3. 2018/11/13 - fix: Fix issue where relay activation cound command would NAK
4. 2018/11/14 - fix: Fix issue with ENGAGE ONR causing controller to drop offline due to cpu load
5. 2018/11/14 - fix: Fix order of initial config messages for CIA downstream devices
6. 2018/11/19 - mod: Clear OSDP and AES keys during a bulk erase
7. 2018/11/20 - fix: Fix auto-save timer issue introduced with previous CIA updates (constantly executes)
8. 2018/11/21 - fix: Fix issue where REX on reader(s) 2-8 would activate reader 1 REX
9. 2018/11/28 - fix: Fix issue with 3103 command deactivation time discrepancies
SIO MODULE
1. 2018/11/08 - mod: Add support for onboard OSDP biasing resistor
2. 2018/11/14 - fix: Fix issue with OSDP reader address and baud rate reporting if opposite reader was changed
3. 2018/11/14 - fix: Fix issue HID OSDP readers soft reset causing LED table to be lost
4. 2018/11/19 - fix: Fix issue with LP1501 and MRDT support
5. 2018/11/27 - fix: Fix issue with SF2F LED when in CARD + PIN
6. 2018/12/03 - fix: Fix issue with handling of OSDP readers that do not support File Transfer but FT is attempted
WEB MODULE
1. 2018/11/13 - mod: Update to not display OSDP readers on file transfer list if connected to Series 2 SIO's
2. 2018/11/14 - fix: Fix reporting of OSDP file transfer status for alternate reader
3. 2018/11/14 - fix: Fix reporting of Port 2 on Device info webpage
4. 2018/11/15 - fix: Fix potential injection vulnerability on advanced routing webpage
5. 2018/11/14 - fix: Fix product name referenced on home page for OEM code 4352
6. 2018/11/16 - fix: Fixed miscellaneous issues found in testing related to new XML web request
7. 2018/11/26 - mod: updates to OEM settings for OEM code 10496
<<<<<<< CUMULATIVE BUILD COUNT 00603 >>>>>>>
FileSystem 2.23
========================= 2018/11/05, LP Series 1_27_0 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00602 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/07/30 - mod: Allow controller to run in degraded mode if license check fails
2. 2018/08/06 - fix: Filter invalid nEscortCode values in 124 command
3. 2018/08/14 - mod: Create new field in 1105 command (adbFlags) to support new escort type
4. 2018/08/14 - mod: Allow ACR_F_HOST_CBG to be changed via 308 command
5. 2018/08/15 - fix: Fixed issue HID reader not reporting offline if Secure Channel enabled and in link mode
6. 2018/08/17 - fix: Fix issue with Secure Channel OSDP reader not reconnecting after controller power cycle
7. 2018/08/24 - fix: Fix alt reader tamper status reporting
8. 2018/08/30 - fix: Fix to ensure AES required in 109 command is honored
9. 2018/09/04 - mod: Add support for new escort type (low-hi)
10.2018/09/14 - mod: Add support for ECC and PIV-I cards when using EntryPoint
11.2018/09/18 - mod: Allow reporting of OSDP reader address and baud rate in ACR extended status
12.2018/09/18 - fix: Fix override credential not checking anything other than 1st slot
13.2018/09/21 - mod: Remove "broadcast" of web server information in zeroconf advertisement
14.2018/09/27 - mod: Allow connections to standard LSP firmware (non "M")
15.2018/10/04 - mod: Add transaction for elevator floor access
16.2018/10/04 - mod: Add support for Schlage ONR on ENGAGE devices
17.2018/10/04 - fix: Allow OSDP file transfer files to overwrite files of the same name
18.2018/10/05 - mod: Create new XML RESTful request to return all web configuration settings
19.2018/10/15 - fix: Fix backwards compatibility with 906 command (depending on driver)
20.2018/10/09 - mod: Add support for dormakaba Wi-Q hardware
21.2018/10/11 - mod: Add support for new Tunnel connections using USB network adapter
22.2018/10/11 - fix: Fix to send correct FASCN or GUID to EntryPoint
23.2018/10/12 - mod: Add new port type for Tunnel connections
24.2018/10/15 - fix: Fix invalid value in ACR status report (9105)
25.2018/10/16 - mod: Update to support WaveLynx readers with EntryPoint
26.2018/10/17 - fix: Fix transaction source for TypeCoSFileDownloadStatus transactions
27.2018/10/18 - fix: Fix EntryPoint logging invalid encoded card data on AAM error
28.2018/10/18 - fix: Limit hostname to 63 characters when registering with zeroconf
29.2018/10/19 - fix: Fix issue with alt reader tamper reporting
30.2018/10/22 - fix: Fix reporting of failure action related to EntryPoint AAM
31.2018/10/25 - fix: Add missing card transaction when Schlage Apartment mode transitions from secure to unsecure
32.2018/10/26 - fix: Add sanity check to ensure internal SIO pipe cannot connect if model is external SIO type
33.2018/10/26 - fix: Fix issue related to no buzzer at reader when in Card and Pin
34.2018/10/26 - mod: Add webpage status transactions for new web features
35.2018/10/31 - fix: Fix watchdog timeout when defining invalid Operation Mode (out of bounds)
36.2018/10/31 - fix: Fix for ACR reporting related to OSDP file transfer
SIO MODULE:
1. 2018/08/21 - fix: Resolve issues when reporting all attached reader Secure Channel statuses
2. 2018/08/21 - fix: Resolve issues reader Secure Channel status reporting
3. 2018/09/18 - mod: Report current OSDP reader address and baud rate for ACR extended status
4. 2018/10/15 - mod: Update OSDP polling rate to improve performance
5. 2018/10/18 - mod: Implement OSDP ACURXSIZE command
6. 2018/10/25 - fix: Fix LP1501 internal SIO model reporting
7. 2018/10/29 - fix: Fix issues related tamper reporting on MRDT on 2nd reader port
WEB MODULE:
1. 2018/08/14 - mod: Update status page transactions to handle new escort transactions
2. 2018/08/15 - fix: Fix issue with OSDP file transfer modifying uploaded files with specific byte patterns
3. 2018/09/06 - mod: updates to OEM settings for OEM code 1024
4. 2018/09/17 - mod: Report source IP address of an invalid web login attempt
5. 2018/09/20 - mod: Allow controller Firmware upgrades through webpage (Diagnostic Page)
6. 2018/09/25 - fix: Fix OSDP file transfer issues related to name in Internet Explorer
7. 2018/09/28 - fix: Fix OEM code issue related to password strength when defining user after bulk erase for OEM 12800
8. 2018/10/03 - fix: Fix OSDP file transfer page not overwriting file with same name
9. 2018/10/05 - mod: Create new XML RESTful request to return all web configuration settings
10.2018/10/11 - mod: Allow tunnel connection settings in network settings
11.2018/10/16 - fix: Limit up to 63 characters in Hostname field
12.2018/10/18 - fix: Fix issue with IP client settings displaying IP server options
13.2018/10/18 - fix: Fix OSDP reader list to ensure listed reader is OSDP type
14.2018/10/19 - fix: Fix potential buffer overflow
15.2018/10/26 - mod: updates to OEM settings for OEM code 2048
16.2018/10/28 - mod: Update status page transactions to handle new CoS Elevator Access
========================= 2018/10/11, LP Series 1_26_9 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00601 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/10/10 - fix: Fixed issue with DHCP request/renewal
2. 2018/10/10 - mod: Update to allow additional card types with EntryPoint
========================= 2018/09/06, LP Series 1_26_8 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00600 >>>>>>>
FileSystem 2.23
WEB MODULE:
1. 2018/09/06 - fix: Fixed issue with reporting extraneous data in HTML header
2. 2018/09/06 - mod: updates to OEM settings for OEM code 1024
========================= 2018/08/15, LP Series 1_26_7 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00599 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/08/09 - fix: Fixed issue 215/219 commands not saving/deleting files
2. 2018/08/15 - fix: Fixed issue HID reader not reporting offline if Secure Channel enabled and in link mode
WEB MODULE:
1. 2018/08/15 - fix: Fixed issue with uploading certain files to OSDP File transfer page
========================= 2018/08/01, LP Series 1_26_6 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00598 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/07/09 - fix: Fixed issue with LP1501 always reporting power tamper in ID report
2. 2018/07/09 - fix: Fixed issue with LP1501 crashing if SIO and OSDP reader defined
3. 2018/07/26 - fix: Fixed issue with HID OSDP readers random loss of LED table and tamper reporting
4. 2018/07/26 - fix: Fixed issue with SimonsVoss Smart lock reporting door forced when REX used
5. 2018/07/31 - fix: Fixed issue with SimonsVoss cylinder lock reporting tamper at first card usage
WEB MODULE:
1. 2018/07/09 - mod: updates to OEM settings for OEM code 1024, 2048 and 4352
2. 2018/07/27 - mod: updates to OEM settings for OEM code 1024
========================= 2018/07/02, LP Series 1_26_5 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00597 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/07/02 - fix: Fixed issue related to diagnostic command used by production tester for testing inputs
========================= 2018/06/28, LP Series 1_26_4 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00596 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/06/11 - fix: Fixed primary controller crashing when there is no NIC2 and a TK OverWatch user connects
2. 2018/06/11 - fix: Fixed DED mode not being sent down for previously configured TK ACR's
3. 2018/06/11 - add: New transaction for file downloads
4. 2018/06/14 - fix: Addressed issue where stale data was being used for access activity while in apartment mode
5. 2018/06/14 - fix: Web users created form web page and from API command could corrupt web page
6. 2018/06/14 - fix: Fix for invalid OTIS denies
7. 2018/06/18 - fix: Avoid restarting door timer every time the handle is used (SimonsVoss)
8. 2018/06/18 - fix: Fixed one-time TZs and updating previously configured TZs not being caught by scheduled public floors
9. 2018/06/21 - fix: Fixed SIOs downstream traffic LEDs shutting off after card autosave is done
10.2018/06/22 - fix: File download command cutting off filename
11.2018/06/22 - fix: OSDP file transfer packet size adjustment not properly using correct buffer size for unencrypted connections
12.2018/06/26 - fix: Fix issue on LP1501 with 2 total readers if they are mixed technologies
13.2018/06/26 - fix: Logic implemented to address issue with not being able to update Series 3 SIO firmware
14.2018/06/27 - fix: Fixed OTIS service bit not being saved correctly and therefore not restarting after power up
<<<<<<< CUMULATIVE BUILD COUNT 00595 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/05/28 - mod: Added more diagnostic messages around certificates
2. 2018/05/29 - fix: 908 command is not setting network diagnostics after a reboot
3. 2018/05/29 - fix: Disabling NTP time through the 909 command requires fields that are not valid
4. 2018/05/31 - fix: Additional fixes related to extended LED color change
5. 2018/06/01 - fix: Addressed issue where SIOs are using default key instead of master key
6. 2018/06/04 - fix: Over-watch broker users should not be erased after a reset
7. 2018/06/04 - fix: Various SimonsVoss fixes
8. 2018/06/05 - fix: Elevator integrations will now receive public floor updates based on timezone changes
9. 2018/06/05 - fix: Addressed potential crash if protocol is Salto and no ACRs have been defined
10.2018/06/05 - fix: Fixed alt reader tamper status is not reporting when same reader is primary and alternate
11.2018/06/07 - fix: Escort check on elevators was not correct, wasn't checking if any floors were active
12.2018/06/08 - fix: Clean up related to public and disabled floors when determining whether to grant or deny access
13.2018/06/08 - fix: Fixed access request for Otis
14.2018/06/08 - fix: Fixed type 1 elevators not honoring override floors
WEB MODULE:
1. 2018/05/30 - fix: ACR numbers above 63 not appearing on OSDP File Transfer page
2. 2018/05/30 - fix: Alternate readers being disabled on OSDP File Transfer page
========================= 2018/05/25, LP Series 1_26_3 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00594 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/05/16 - fix: OSDP File get command modifications
2. 2018/05/16 - fix: Accessing the MQTT status array for TKE now checks for invalid values and will return false if one is found
3. 2018/05/17 - fix: Turnstile fixes for KONE
4. 2018/05/17 - fix: NTP threading update
5. 2018/05/24 - fix: Addressed multiple issues introduced with the previous extended LED color changes
SIO MODULE:
1. 2018/05/23 - fix: Fix issues related to the OSDP 0x7F address
WEB MODULE:
1. 2018/05/14 - fix: Extra text is listed after OSDP file on web page when loading a long filename
2. 2018/05/24 - fix: DNS settings show up when DHCP is used
3. 2018/05/24 - fix: Generate web activity transactions for user updates
4. 2018/05/24 - fix: Addressed issue on status page related to transactions and date/time search
<<<<<<< CUMULATIVE BUILD COUNT 00593 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/05/02 - fix: Updating the 900 set timeserver command to correctly display Interval in Minutes
2. 2018/05/02 - mod: Updates to command to retrieve loaded files to include index and file type
3. 2018/05/04 - mod: Updates to command for OSDP file transfer to readers
4. 2018/05/04 - fix: Fixed TKE related transactions to not report a cab if theres no floor on timeout
5. 2018/05/07 - fix: Fix restoration of old reader LED table due to new extended LED colors
6. 2018/05/08 - fix: Fixed an issue where if no PIN exists, we send a deny for CARD & PIN mode for elevator integrations
7. 2018/05/08 - fix: EntryPoint will now deny nibble formatted card data
8. 2018/05/08 - fix: KONE - Fixed global clear masks being sent when the SIO/ACRs are configured for RCGIF
9. 2018/05/09 - fix: pivCLASS embedded back en implementation for disable discovery
10.2018/05/10 - fix: KONE - fixes for Hybrid System, separates what GMasks to send
SIO MODULE:
1. 2018/05/02 - fix: Fixed HTML layout error when using Firefox
2. 2018/05/02 - fix: Moved "Enable Encrypted Partition" to the Security Options webpage
3. 2018/05/04 - fix: Fix NAK to osdp_COMSET command can cause endless loop
4. 2018/05/09 - fix: Fix a bug when OSDP readers report online briefly when first configuring
WEB MODULE:
1. 2018/05/08 - mod: Increase the filename length for OSDP file transfers
========================= 2018/04/30, LP Series 1_26_2 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00592 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/04/27 - fix: Remove OverWatch users on a bulk erase
2. 2018/04/30 - fix: KONE features corrected according to FAT certification
3. 2018/04/30 - fix: NTP clean up related to API command
WEB MODULE:
1. 2018/04/26 - mod: updates to OEM settings for OEM code 9216
<<<<<<< CUMULATIVE BUILD COUNT 00591 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/03/12 - fix: OSDP bio verify fix when in secure channel
2. 2018/03/12 - fix: KONE elevator fixes
3. 2018/03/14 - add: Status of elevator floors
4. 2018/03/20 - fix: Fix for chimes and 1143 command with 1006 and default group
5. 2018/03/20 - add: Check passwords against list of common passwords
6. 2018/03/27 - mod: Activation/deactivation time on a timezone
7. 2018/04/03 - add: Ability to simulate PIN entries at an ACR
8. 2018/04/03 - add: Encrypted file partition support
9. 2018/04/06 - add: OSDP file transfer support via API
10.2018/04/10 - fix: Invalid ACR number in momentary unlock command caused a crash
11.2018/04/10 - mod: Increase password lengths
12.2018/04/12 - fix: Schlage WoR updates around apartment mode and deadbolt
13.2018/04/13 - mod: Blue LED color support on OSDP readers
14.2018/04/17 - fix: Multiple SimonsVoss improvements
15.2018/04/18 - fix: Schlage relock command around deadbolt functionality
16.2018/04/19 - fix: Update logic around RSD oem code for Schlage locks
17.2018/04/19 - fix: Update temp override logic to allow the LE lock with deadbolt to honor temp override modes
18.2018/04/25 - mod: Added an additional special 37-bit parity check
19.2018/04/25 - fix: Protection added to not lose cards when more are sent down during save from SRAM to flash
20.2018/04/25 - mod: Additional thyssenkrupp integration support changes
WEB MODULE:
1. 2018/03/19 - fix: Replaced outdated jQuery that was vulnerable to Cross-Site Scripting
2. 2018/04/04 - fix: OEM table updates to show NIC2 options by default on all LP1501 controllers
3. 2018/04/11 - fix: Ability to disable the USB port and microUSB ports
4. 2018/04/17 - mod: updates to OEM settings for OEM code 9216
========================= 2018/03/09, LP Series 1_26_1 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00588 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2018/01/15 - mod: Changed thread locking to use critical sections
2. 2018/01/23 - fix: Gratuitous ARP sends an Invalid IP
3. 2018/01/29 - add: Cumulative build count added to ID Report
4. 2018/01/29 - fix: EntryPoint embedded cleanup
5. 2018/02/09 - fix: Fix F2F reader LED indication if strike is configured to be on a different SIO
6. 2018/02/21 - add: New command added to retrieve controller certificate info
7. 2018/03/05 - fix: Fixed issue with ACR configurations that did not link to actual reader
8. 2018/03/08 - fix: Various fixes for KONE elevator support
9. 2018/03/08 - fix: Support added for Thyssenkrupp elevator (in progress)
10.2018/03/08 - add: Support for NTP
SIO MODULE:
1. 2018/02/20 - fix: Addressed length issue with OSDP passthrough
========================= 2018/01/15, LP Series 1_26_0 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00581 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/12/22 - fix: Fixed issue where adding a host name would not save correctly under IP Client
2. 2018/01/11 - fix: Remove check for OSDP Secure Channel setting at controller level when enabling link mode, check is done in SIO
3. 2018/01/11 - add: Initial changes to support dormakaba integration
4. 2018/01/12 - mod: Implement new optimized polling mechanism for MR62e
WEB MODULE:
1. 2018/01/04 - fix: Display default login instruction warning when default login entered and default login mode not enabled
========================= 2017/12/16, LP Series 1_25_6 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00580 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/12/16 - fix: Addressed issue of getting stuck on a reboot related to peer certificates
<<<<<<< CUMULATIVE BUILD COUNT 00579 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/12/07 - fix: SimonsVoss fix for lock falling out of sync with acr mode when office mode
2. 2017/12/08 - fix: Fix for better handling of multiple readers on a port
3. 2017/12/11 - fix: Improvements related to advanced networking
4. 2017/12/12 - fix: Prompt for second user LED is not working after a host response
5. 2017/12/14 - fix: Controller sends time update to Aperio hubs
6. 2017/12/14 - fix: Modified how the check for disabling default login account is managed
========================= 2017/12/07, LP Series 1_25_5 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00578 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/12/05 - fix: SimonsVoss fix to properly use deny access message
2. 2017/12/06 - fix: Correction for how LCD text is sent to remove garbage characters at end of string
3. 2017/12/06 - fix: NIC 2 routing table did not get recreated on boot if set to DHCP
<<<<<<< CUMULATIVE BUILD COUNT 00577 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/11/21 - fix: KONE fix for multiple cards being processed at same time
1. 2017/11/22 - fix: Two Card Control - reader does not acknowledge card 1 when it is swiped multiple times
2. 2017/11/29 - fix: Bioscrypt command ID check, now processes a poll command
3. 2017/11/29 - fix: Inovonics IPS monitor point CoS not processed all the time
4. 2017/12/01 - fix: Encrypted communications to SimonsVoss
5. 2017/12/02 - fix: Removed logos for OEM codes 7680 and 9472
6. 2017/12/04 - fix: Modification related to SimonsVoss office mode
7. 2017/12/04 - fix: Peer certificates will no longer be removed from bulk erase
8. 2017/12/04 - fix: 1107 command would not generate a NAK if failing to allocate triggers
<<<<<<< CUMULATIVE BUILD COUNT 00576 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/11/20 - fix: Modification made for two card control
WEB MODULE:
1. 2017/11/20 - fix: Updates to properly support advanced networking page
2. 2017/11/20 - fix: Corrections made to status page for monitor points
3. 2017/11/21 - fix: Internet Explorer logs users out when changing network setting to DHCP
<<<<<<< CUMULATIVE BUILD COUNT 00575 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/11/13 - fix: Additional KONE fixes
2. 2017/11/15 - fix: Additional corrections for OSDP reader if the same reader is both primary / alternate
3. 2017/11/15 - fix: Addressed issue where OAL and office mode commands could be sent to the wrong ACR/Lock
4. 2017/11/15 - fix: Fix to provide Cab info in access request (OTIS)
5. 2017/11/16 - fix: Corrected issue where alternate reader tamper is not displayed as a separate message when both the primary / alternate are the same ACR
6. 2017/11/16 - fix: SNMP fix related to v2c user file if v3 user existed
WEB MODULE:
1. 2017/11/17 - add: Advanced Networking page added
<<<<<<< CUMULATIVE BUILD COUNT 00574 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/11/02 - mod: Update to automatically enable double card if in classroom or office mode
2. 2017/11/02 - add: Added flag to turn on/off the ability to disable access to elevator floors
3. 2017/11/03 - fix: Inovonics low battery will no longer cause IPS group alarm
4. 2017/11/06 - add: Generate new web activity transaction to indicate invalid login limit reached
5. 2017/11/06 - mod: Will now only force WoR value to 10 if off or greater than 10
6. 2017/11/07 - add: Offline Access List transactions added
7. 2017/11/07 - mod: Support for all SimonsVoss wave_net address masks
8. 2017/11/08 - add: Access Granted transactions will now report escort type as well as OTIS Cab info
9. 2017/11/08 - mod: Updated handling of primary/alternate reporting when same reader
10.2017/11/08 - add: Added the ability to put alternate ACR into OSDP secure channel link mode
11.2017/11/09 - fix: Various KONE elevator fixes
12.2017/11/10 - mod: Modifications for SimonsVoss TLS communications
WEB MODULE:
1. 2017/11/02 - mod: Ability to disable default login credentials added
========================= 2017/11/02, LP Series 1_25_4 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00572 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/10/10 - add: Support for SimonsVoss keypad
2. 2017/10/12 - fix: Poll cancel was not being handled properly and caused issues with AES encryption
3. 2017/10/13 - mod: Generate diagnostic transaction if invalid nPinDigits detected
4. 2017/10/17 - fix: Schlage WoR improvements
5. 2017/10/18 - fix: LifeSafety Power will now report outputs as offline if M8 is offline
6. 2017/10/19 - fix: Addressed issue where procedures were generating NAKs
7. 2017/10/20 - fix: Inovonics low battery reports up as a fault causing IPS groups to go into alarm
8. 2017/10/20 - mod: Ability to delete all actions within a procedure
9. 2017/10/20 - mod: Double card flag is now enabled for office mode
10.2017/10/23 - mod: Performance improvements to help prevent watchdog resets
11.2017/10/27 - mod: Schlage RU/RM will report latchbolt
12.2017/10/27 - mod: Support for elevator override
13.2017/11/01 - fix: Various fixes for KONE Elevator integration
SIO MODULE:
1. 2017/10/10 - fix: Additional fix for HID I'm alive dropping offline after an access grant
2. 2017/10/24 - fix: Fixed issue of failing to detect that the door was opened on an access grant when using WIU-4
3. 2017/10/24 - fix: Only allow multiple readers on a single port if paired
4. 2017/10/25 - fix: F2F reader tamper not reporting properly
WEB MODULE:
1. 2017/10/20 - add: Ability to disable default login credentials added
2. 2017/10/27 - fix: Will now properly display alert message if no users defined
<<<<<<< CUMULATIVE BUILD COUNT 00571 >>>>>>>
FileSystem 2.23
========================= 2017/10/06, LP Series 1_25_3 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00570 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/09/25 - mod: Initial changes related to Aperio V3 support
2. 2017/09/26 - add: Basic Schlage RU/RM support
3. 2017/09/28 - fix: Addressed issue with LCD text not displaying properly
4. 2017/10/04 - mod: Changed the AES key transport mechanism for host communication
5. 2017/10/05 - fix: Added in protection from crashing if baud rate was specified as 0
6. 2017/10/05 - mod: Updates for new SimonsVoss functionality
7. 2017/10/05 - mod: Additional KONE elevator support
8. 2017/10/05 - fix: Addressed conflict with eth1 and RNDIS on USB port
9. 2017/10/05 - mod: Improvements with peer certificate validation
10.2017/10/05 - fix: Fixes related to the new LP polling mechanism
SIO MODULE:
1. 2017/09/12 - fix: Addressed issue with HID I'm alive dropping offline after an access grant
WEB MODULE:
1. 2017/10/03 - mod: Updated logo for OEM code 1024
2. 2017/10/04 - mod: Changed the web label from "Disable Bonjour" to "Disable Zeroconf Device Discovery"
<<<<<<< CUMULATIVE BUILD COUNT 00569 >>>>>>>
FileSystem 2.23
========================= 2017/08/30, LP Series 1_25_2 =============================
<<<<<<< CUMULATIVE BUILD COUNT 00568 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/08/25 - mod: Clear data on bulk erase for 802.1x settings
2. 2017/08/30 - add: Added tracking of relay activations for onboard relays
WEB MODULE:
1. 2017/08/29 - fix: Fixed a bug on LP1502 network page
<<<<<<< CUMULATIVE BUILD COUNT 00567 >>>>>>>
FileSystem 2.23
SCP MODULE:
1. 2017/07/19 - add: Added handling the returning of nAuthModFlags for ACR status request
2. 2017/07/25 - fix: Changes to address APB free pass command not being backwards compatible with older drivers
3. 2017/08/02 - mod: SimonsVoss lock comm monitoring
4. 2017/08/10 - mod: Added OSDP LED follow strike time capability
5. 2017/08/11 - fix: Fixed backwards compatibility of poll delay cancel command with older driver
6. 2017/08/23 - mod: Report the Schlage OEM code as 0
7. 2017/08/24 - mod: Updates for OSDP file transfer
8. 2017/08/24 - mod: Ongoing changes for KONE elevator support
9. 2017/08/24 - add: Proxy support for IP Client